CATEGORIES
FEATURED PRODUCTS
Galvanized Welded Steel Pipe of Very Good Quality Spiral Welded Carbon Steel Pipe Is Used for Engineering Construction Pipes
Galvanized Welded Steel Pipe of Very Good Quality Spiral Welded Carbon Steel Pipe Is Used for Engineering Construction Pipes
Galvanized steel pipes are divided into cold galvanized steel pipes and hot-dip galvanized steel pipes. Cold galvanized steel pipes have been banned, while the latter is still temporarily recommended for use by the state. In the 1960s and 1970s, developed countries internationally began to develop new types of pipes and gradually banned the use of galvanized pipes. The Ministry of Construction of China and three other ministries also issued a document clearly stating that galvanized pipes should not be used as water supply pipes starting from 2000. Cold water pipes in new residential areas rarely use galvanized pipes anymore, although some residential areas still use galvanized pipes for hot water pipes.
Galvanized Steel Pipe Weight Coefficient
Nominal Wall Thickness (mm): 2.0, 2.5, 2.8, 3.2, 3.5, 3.8, 4.0, 4.5.
Coefficient Parameter (c): 1.064, 1.051, 1.045, 1.040, 1.036, 1.034, 1.032, 1.028.
Note: The mechanical properties of steel are important indicators to ensure the final performance (mechanical properties) of steel, which depend on the chemical composition and heat treatment system of the steel. In the steel pipe standards, according to different usage requirements, tensile properties (tensile strength, yield strength or yield point, elongation), hardness, toughness indicators, and high and low temperature performance required by users are specified.
Steel Grade: Q215A; Q215B; Q235A; Q235B
| Product | Hot Dip Galvanized Steel Pipe |
| Material | Carbon Steel |
| Grade | Q195 = S195 / A53 Grade A Q235 = S235 / A53 Grade B / A500 Grade A / STK400 / SS400 / ST42.2 Q345 = S355JR / A500 Grade B Grade C |
| Standard | EN39, BS1139, BS1387, EN10255,ASTM A53, ASTM A500, A36, ASTM A795,ISO65, ANSI C80, DIN2440, JIS G3444,
GB/T3091, GB/T13793 |
| Surface | Zinc coating 200-500g/m2 (30-70um) |
| Ends | Plain ends |
| with or without caps |
Galvanized Carbon Steel Pipe Size Chart :
|
DN |
OD |
ASTM A53 / API 5L / ASTM A795 |
BS1387 / EN10255 |
|||||
|
SCH10S |
STD SCH40 |
SCH80 |
Light |
Medium |
Heavy |
|||
|
MM |
INCH |
MM |
MM |
MM |
MM |
MM |
MM |
|
|
15 |
21.3 |
1/2" |
2.11 |
2.77 |
3.73 |
2 |
2.6 |
- |
|
20 |
26.7 |
3/4“ |
2.11 |
2.87 |
3.91 |
2.3 |
2.6 |
3.2 |
|
25 |
33.4 |
1" |
2.77 |
3.38 |
4.55 |
2.6 |
3.2 |
4 |
|
32 |
42.2 |
1-1/4" |
2.77 |
3.56 |
4.85 |
2.6 |
3.2 |
4 |
|
40 |
48.3 |
1-1/2" |
2.77 |
3.68 |
5.08 |
2.9 |
3.2 |
4 |
|
50 |
60.3 |
2" |
2.77 |
3.91 |
5.54 |
2.9 |
3.6 |
4.5 |
|
65 |
73 or 76 |
2-1/2" |
3.05 |
5.16 |
7.01 |
3.2 |
3.6 |
4.5 |
|
80 |
88.9 |
3" |
3.05 |
5.49 |
7.62 |
3.2 |
4 |
5 |
|
90 |
101.6 |
3-1/2" |
3.05 |
5.74 |
8.08 |
|||
|
100 |
114.3 |
4" |
3.05 |
6.02 |
8.56 |
3.6 |
4.5 |
5.4 |
|
125 |
141.3 |
5" |
3.4 |
6.55 |
9.53 |
5 |
5.4 |
|
|
150 |
168.3 |
6" |
3.4 |
7.11 |
10.97 |
5 |
5.4 |
|
|
200 |
219.1 |
8" |
3.76 |
8.18 |
12.7 |
|||
|
250 |
273.1 |
10" |
4.19 |
9.27 |
15.09 |
|||
Test Pressure Value/Mpa: 3Mpa for D10.2-168.3mm; 5Mpa for D177.8-323.9mm
Current National Standard for Galvanized Steel Pipes
Galvanized Pipe National Standards and Size Standards
GB/T3091-2015 Welded Steel Pipes for Low-Pressure Fluid Delivery
GB/T13793-2016 Straight Seam Electric Welded Steel Pipes
GB/T21835-2008 Welded Steel Pipe Dimensions and Unit Length Weight
Usage of Galvanized Steel Pipes
Instructions for Use of Galvanized Steel Pipes
The commonly referred galvanized pipes, the type of iron pipes used for gas and heating, are also galvanized pipes. As water pipes, after using for several years, a large amount of rust scale is produced inside the galvanized pipes. The yellow water flowing out not only pollutes the sanitary ware but also contains bacteria that breed on the rough inner walls. The rust corrosion causes the content of heavy metals in the water to be too high, which severely endangers human health
.
Related Products
XING RONG firmly believe that quality is paramount. As aprofessional steel pipe manufacturing enterprise, weare equipped with advanced technology andsophisticated production equipment; and providecomprehensiveservicesandsupport,strictlycontrolling every link from raw material procurement,manufacturing,qualitycontrolandexporttransportation, to meet the growing demand in thefield of building structures and fluid transportationaround the world. Always adhere to green andenvironmentally friendly production methods, adhereto the principle of sustainable development,andstrive to create a better world !
CONTACT US
PHONE
TIANJING, CHINA
Room 1503, 1st Floor, Ten Billion Dao XING RONG Sales Department, Jinghai District, Tianjin
INQUIRY FOR PRICE LIST
For inquiries about our products or price list, please leave your email and company name to us and we will be in touch within 24 hours.
Leave Your Message
